Installation requirements for cutting iron cutting aluminum saw blade:
1, check whether the saw blade is damaged, whether the tooth type is complete, whether the sawing board is smooth and smooth, and whether there are other abnormal phenomena, so as to ensure the safety of use.
2, the equipment is in good condition, the spindle has no deion, no skip, solid installation, no vibration and so on.
3. When assembling, make sure that the direction of the saw blade arrow is in accordance with the rotation direction of the main shaft.
4, when the blade is installed, the shaft center, the disc and the flange plate should be kept clean, the inner diameter of the flange plate is in accordance with the inner diameter of the saw blade, and the flange plate is tightly combined with the saw blade, and the positioning pin is installed and the nut is tightened. The size of the flange shall be appropriate, and the outer diameter shall be not less than 1/3 of the saw blade diameter.
5, before the equipment is opened, to ensure the safety of the equipment, there is a single operation equipment, move empty, check the equipment turn right or not, there is no vibration, saw blade first empty for a few minutes, without skidding, swinging or beating normal work.